Hoverboard

Hoverboards 10 inches: features and tips for use

Hoverboards 10 inches: features and tips for use
Content
  1. Peculiarities
  2. Advantages and disadvantages
  3. Model overview
  4. How to choose external and internal accessories?
  5. External
  6. Operating rules

The original bright platforms with two wheels and electric motors called gyro scooters are becoming more and more popular every year both among young people and among adults. The automatic balancing system makes it easy to operate this vehicle. You can ride a gyro scooter on various roads, including country roads.

Peculiarities

The 10-inch hoverboard first appeared in 2013, replacing the heavy and bulky segway. The original vehicle is a platform with two wheels. Inside the case is a "smart system" responsible for balancing. The position of the platform relative to the road is determined by gyroscopic sensors, with which the signal is sent to the engine. A hoverboard seat is not provided.

The driver is in an upright position while driving. The dimensions, weight and cost of a hoverboard are small compared to a segway. It should be noted that learning to ride it is very simple. It is enough to tilt the body forward or backward, and the tool will begin to move in the appropriate direction. For turns, the center of gravity must be shifted to the right or left. Taking a horizontal position, you can get off the platform. To do this, take one step back so that the platform remains in front of the driver.

Advantages and disadvantages

Among the many advantages of 10-inch hoverboards, it is worth highlighting the large carrying capacity, which became possible due to the impressive size of the platform. The body is robust and is most often made of carbon.Large wheels can easily navigate a variety of surfaces, including gravel, sand, grass, tiles, asphalt and others. It is also important to note the environmental friendliness of this type of transport.

The powerful battery recharges quickly and allows you to travel long distances on a single charge. The presence of a bright backlight allows you to illuminate the road in the evening. The colorful design makes travel more enjoyable. Protection from dust and dirt allows you to move on a two-wheeled vehicle in any weather. The significant weight of 13 kilograms or more makes it difficult to carry the device.

Among the shortcomings, many note loud sounds when the unit is turned on. The motion sensor can sometimes give an error, and the device will shake a lot.

Model overview

Smart Balance PRO PREMIUM 10.5 V2

The main advantage of this model is it is comfortable control due to the auto-balance function and wide inflatable wheels. There are built-in Bluetooth speakers. The battery with increased capacity is able to provide skiing for three hours. At the same time, the maximum speed will be quite good - up to 18 km / h.

The model is well suited for both experienced hoverboard users and beginners. You can learn how to use it in 10-15 minutes. Of the significant disadvantages, it is worth noting long battery charging.

Smart Balance Pro 10

Large wheels and a compact body are combined with an original design. This model weighs about 15 kg, which makes it easy to transport. The acceleration is provided by the presence of six sensors, which also contribute to better balancing. A reliable device capable of picking up speed of 20 km / h and running up to 20 kilometers. The hoverboard charging time is two hours.

Smart Balance AMG 10

Fast and comfortable model of good quality. Inflatable large wheels can handle any kind of surface. There is a built-in Bluetooth-device that will be appreciated by music lovers. Excellent balance and stability complemented by rain protection. Nice moment is good sensitivity to driver movements.

Among the advantages, it is also worth noting strength, good speed, weight of 13.5 kg. Charges quickly, but the battery lasts a maximum of 40-50 minutes. It is advisable to protect the body from strong blows.

Smart Balance Wheel SUV 10

The main advantages of this hoverboard are convenient operation and excellent quality. Music is played by a Bluetooth device. The sensor has good sensitivity, which improves maneuverability. The imposing wheels are capable of driving on various roads and even crossing holes. The pluses include a wide range of color options.

The charge is enough for a couple of hours of driving. Despite its moderate weight (13 kilograms), it is inconvenient to carry the hoverboard without a cover. It emits a loud and unpleasant sound when turned on.

Headlights absorb a lot of energy as they cannot be turned off.

HIPER ES100

One of the few hovercraft models that can support a weight of 120 kg. Among the advantages it is worth noting good quality, strength, simple and convenient operation... An ascent angle of 17 degrees is the best option when traveling. The device is capable of speeds up to 10 km / h. One battery charge is enough to cover a distance of 20 kilometers.

How to choose external and internal accessories?

Hoverboard accessories are divided into external and internal. External include all those that can be seen immediately without looking inside the device. There are quite a lot of additional elements for a gyro scooter and they cost quite a lot.

External

Most often, the first purchase after the hoverboard itself is a cover or bag. They are needed in order to facilitate the transportation of a two-wheeled vehicle in the hands. Especially the bag is needed for such models as a 10-inch hoverboard. It is advisable to opt for a cover made of dense material with good water-repellent properties. This will allow you not to worry about the gyroboard in rainy weather.

For very large models, it is worth choosing not bags, but backpacks. They do not dangle from side to side, and it becomes more convenient to carry the device. In addition, the weight is more evenly distributed between the shoulders.

The control panel (Bluetooth dongle) is usually included in the kit. However, it can sometimes get lost. It is not difficult to buy it if you go to a special store where accessories for hoverboards are sold. Rarely, but you also have to choose a new case. Most often this is necessary when the previous one either broke or was badly scratched. Often this happens when it is turned off, when the hoverboard is overturned. It is quite easy to buy a case for a well-known model. At the same time, you can choose the original version in terms of the color scheme.

It is advisable to purchase a body made of carbon fiber or shock-resistant plastic. Such options are more expensive, but they have a long service life. It is worth noting that for some ultra-modern gyro scooters, for example, from Xiaomi, housings can be ordered exclusively from the manufacturer.

To protect the case, you can get a silicone case. Thanks to him, the entire structure will be completely closed and become stronger. At the same time, silicone allows you to reduce vibration, which has a positive effect on the internal components of the device. Of course, it must be borne in mind that with a silicone case on, the hoverboard will lose its original color.

Among the protective equipment, special tapes are also popular. The stickers are cut to the correct size and applied to the areas that need to be protected. It, just like the cover, is capable of somewhat spoiling the appearance of the gyro scooter. On the upper part of the case, you can purchase rubber bands that will prevent your shoes from scratching the hoverboard while riding.

Internal

Internal parts most often include parts that have to be purchased in the event of a malfunction. For example, the battery often breaks down or simply does not hold the charge well. Here, when choosing, you should be guided by only one rule - it is more expensive in proven stores. We have to make both the replacement of the wheels and the frame of the device itself. Less often, but the control system of gyroscopic sensors responsible for balancing may also fail.

Operating rules

Before using the gyro scooter, it is advisable to familiarize yourself with the instructions attached to it. It contains detailed characteristics and features of operation. Experienced users recommend paying special attention to pressure in 10-inch wheels... This point is very important, as it affects how the hoverboard will contact the road surface. This parameter affects both the comfort when moving on the gyroboard and tire wear.

It is recommended to maintain the tire pressure at a certain level depending on the temperature indicators. Moreover, for many models of gyro scooters, these values ​​are the same. For example, in the summer, the camera should be pumped up to 2.3–2.4 atm. When it is cool outside, for example, in the autumn and spring months, it is better that the pressure is 2.6 atm.

The maximum to which a tire can be inflated is no more than 3 atm.

Of course, you can find out more accurate figures for the pressure in the wheels by reading the tire passport. A pressure gauge can be used to determine the tire pressure. Some craftsmen determine the value of pressure by pressing on the wheel, but this method does not give exact numbers. Eventually improperly pumped cameras can lead to unpleasant consequences.

It is necessary to charge the battery only after it is completely discharged, as indicated by the red indicator. If you recharge an incompletely dead battery, you can quickly disable it. It is also important not to leave the battery in the cold. In no case should the hoverboard be used when the battery charge is very low or it is being charged from the mains. Also, do not operate the device when reporting a system error or during heavy rain. Do not wash the unit with water or wet it strongly, as this can lead to damage.

In the next video you will find a detailed overview of the Smart Balance 10 "hoverboard.

no comments

Fashion

the beauty

House