Bathroom design and decor

Bathroom wall options

Bathroom wall options
Content
  1. Basic requirements for finishing
  2. Types of materials
  3. Unusual materials
  4. Recommendations
  5. Wall design options

It's no secret that the background finish sets the basis for the design of any interior. When it comes to the bathroom, it seems to many that the choice of finishing materials is limited. This is exactly what is justified when the result does not turn out as we would like. From the material in this article, you will learn how to choose the right finish so that the interior looks stylish, effective and high-status.

    Basic requirements for finishing

    The place where a person washes, takes a shower or a bath should be beautiful and functional. However, the conditions in the bathroom are special: it is often damp, evaporation, temperature changes, frequent splashes and condensation are inevitable. Any type of finish used is constantly tested for firmness of attachment, resistance to abrasion under the influence of detergents. Therefore, special requirements are imposed on the finishing raw materials for decorating bathroom floors.

    The finishing material used for wall decoration must be:

    • durable, since the lining in the bathroom is not adjusted or changed too often;
    • durable, resistant to accidental mechanical damage, vibration of the washing machine;
    • waterproof, antistatic or inert to dampness, mold and mildew;
    • environmentally friendly, not emitting toxic substances during long-term operation;
    • easy to clean - dirt should not become part of the pattern of the front surface of the cladding;
    • fireproof, excluding fire, regardless of the reason;
    • aesthetically attractive, capable of increasing the status of the interior of the room being finished;
    • resistant to abrasive substances with regular and frequent cleaning;
    • resistant to deformation during the entire service life.

    The selected raw materials should not allow water to pass to the base of the finished floors.

    Types of materials

    Today there are a lot of finishing materials that can be used to decorate the walls of the bathroom. In this case, the type of specific raw material determines the facing technology. The trim is glued, pulled over the frame, spread on the walls.

    Ceramic tile

    To some, tiles seem like a banal facing raw material. However, this material with the right choice, it allows you to create a background for an interior of any style. The tiles are variable in terms of color, size, texture and shape. It can be smooth, glossy, matte, embossed, glazed, unglazed, three-dimensional, mirror-like.

    The shape of the material can be classic square, rectangular, diamond-shaped, in the form of hexagons, triangles. In addition, it can be a designer fantasy. Tiles can create an accent like a brick; it is relevant for decorating walls like marble, stone, granite.

    This material is durable, does not lose brightness over a long service life.

    The veneer is hygienic and easy to clean, it goes well with other finishing materials. It can be used to decorate the accent area of ​​washing, washbasin, ledge, niche, location of the toilet bowl (in combined bathrooms). It can become the main material for decorating the walls of various types of shower stalls. The tile looks expensive, but you need to select it taking into account the specific interior style.

    Mosaic

    This type of material is nothing more than a square tile with a 2 cm edge. In addition, you can find dies in the form of pentagons and hexagons on sale. Mosaic tiles have the same characteristics as tiles, they are durable, they are not afraid of water, fumes, mildew and mildew. This material is glued to tile glue, like ordinary ceramics, while the finished surface is not afraid of destruction.

    The mosaic texture is varied, like the color, but if you choose the wrong one, the mosaic spoils the whole interior. It can be colored, transparent glass, mirror. It is better to buy a variety on a grid for finishing. It is easier and faster to glue, while reducing the number of joints.

    Mosaic is good as an accent in the bathroom, but it is undesirable to paste over all the walls with it. This creates a ripple effect, and the mosaic itself loses its expressiveness. You can buy a set with a thematic panel that will add a special atmosphere to the interior of the bathroom. You can tiled the bathtub area and screen, shower walls, ledges, or existing niches.

    Plastic panels

    Today, plastic panels are one of the most demanded materials for bathroom decoration. Panels can be fixed with glue, frame. They are different in shape, differ in thickness, size.

    The panels perfectly hide communications, they are hygienic, moisture resistant, easy to install and maintain, and lightweight. These are both narrow slats and standard panels, and sheet siding.

    The uniqueness of this cladding is the ability to imitate any type of material up to a non-existent stone. It perfectly reproduces the texture of tiles, bricks, plaster, concrete, granite, wood. Panels can be glossy, matte, smooth, embossed, monochromatic, patterned. A variety of texture and color solutions allows you to successfully fit the finish into any interior style.

    The panels on the frame are easy to dismantle. You can update them without removing the crate. They are chosen for the embodiment of modern stylistic solutions in the bathroom (modern, hi-tech, art deco, minimalism). The disadvantage of finishing is insufficient mechanical strength. In addition, this cladding cannot be called non-flammable.

    Decorative rock

    Natural stone is an expensive type of wall decoration, but this is justified by the long service life and status of the interior. It has a low absorption coefficient, it does not accumulate radiation, it looks impressive. However, caring for him is not easy because he is afraid of acidic products... Another disadvantage of the stone is its weight: it creates a colossal load on the load-bearing walls.

    Synthetic stone has the same advantages as natural, but is devoid of the disadvantages of natural material... Due to this, it also competes with ceramic tiles. Its main advantages are high aesthetic characteristics, excellent resistance to mechanical damage, long service life, hygiene and environmental friendliness.

    Unlike some finishing materials, it can be used in wet areas of the bathroom. This finish allows you to create a dream interior, giving it a high status. At the same time, it is demanding in combination with other materials. The abundance of stone in the interior of the bathroom looks boring and heavy.

    Self-adhesive film

    Depending on the type of base, the bathroom walls can be finished with self-adhesive. This is a film wound in rolls of different widths, which has a sticky base. It is made of polyvinyl chloride, the front surface has a decorative pattern.

    The film is glued to the prepared base, smoothing it to avoid the formation of air bubbles.

    The film coating can be monochromatic, patterned, glossy, matte, mirror, metallized, three-dimensional. The base for finishing can be glass, wood, plastic, plasterboard and metal. The uniqueness of PVC cladding is the ability to imitate different textures, including tiles, mosaics, textiles, boards, cork.

    The film is not afraid of moisture, it is easy to clean, elastic in adhesion, and provides for wiping with a damp cloth. It can be used to paste over the bathroom panels, to designate the toilet area in the combined bathrooms. The disadvantage of wall decoration is the need for careful preparation of the base. All cracks, old finishing material that has not been removed will stand out clearly on a thin film.

    Dye

    The walls in the bathroom can be painted. Painted floors look unusual, today such a solution is embodied in vintage styles (for example, country or provence). Finishing paints can be different: acrylic, latex, silicone, silicate. Each type of material has its own characteristics.

    For example, acrylic paint is considered breathable because it creates a film with microscopic pores on the surface. Latex is good because it retains the attractiveness of its original appearance for a long period.... She is not afraid of constant cleaning with the use of detergents. Silicone is suitable for painting bricks, concrete and plaster, which allows you to give these surfaces a more pleasant appearance. Silicate is not afraid of moisture and temperature changes.

    The paint is sold in a wide range, its color solutions allow you to choose the shade as accurately as possible in accordance with the intended background design of the interior.

    Despite the fact that the base for painting has to be prepared carefully, this type of finish is one of the most relevant. It is budget-friendly, it allows you to save on calling the master when carrying out repair work.

    Glass tiles

    Tempered glass tiles are today considered one of the extraordinary solutions for decorating bathroom walls. Such a coating is resistant to frequent cleaning, it fills the interior with a feeling of lightness and airiness. The sizes of the dice can be as small as mosaic, as well as large and even large.

    Glass cladding for bathroom walls is transparent and colored. The colors can be very diverse, and the coating is not only monochromatic, but also patterned. Given the inertness of the finish to moisture, it can be used to finish not only dry, but also wet areas of the sanitary room... For example, this tile will withstand the conditions inside the shower stall, it will not deteriorate from constant splashes in the bath or washbasin area.

    Unusual materials

    When you want to decorate the walls with something special, they resort to non-standard solutions. For example, you can sheathe floors with natural wood. However, despite the fact that wood looks impressive and is environmentally friendly, this solution cannot be called practical.

    The tree needs constant care and maintenance of aesthetic appeal, it is constantly deformed, from dampness it can mold and rot.

    An unusual finish can be linoleum for wall decoration. Such material has to be ordered on an individual basis, it is expensive. Like wood, it is chosen for spacious rooms adapted for living rooms. The material is demanding in the preparation of the base, it is considered durable, moderately plastic. It can reliably convey the texture of various finishing materials, it is not only smooth, but also embossed.

    Mirror tiles can be a creative solution for decorating the walls of the bathroom.... Unlike the usual one, it is not so durable; it must be installed in dry areas of a spacious bathroom. Like a mirror mosaic, it can become an independent design element. This version of the finishing material looks unique, the finish is suitable for decorating the bathroom interior in a modern style.

    Someone thinks that the walls of the bathroom can be pasted over with wallpaper or covered with plaster. Both solutions are impractical: both plaster and wallpaper are afraid of damp rooms. Even in spacious bathrooms, such cladding is not enough for a long time: it damp and moves away from the base.

    Recommendations

    The choice of this or that material must be approached thoroughly. This will allow you to create an interior that meets all the canons of style. It is important to consider a number of nuances.

    • Finishing is selected after drawing up a design project. This will allow you to understand the relevance of a particular material.
    • The background design is preferably discreet. You need to buy cladding for the main background and accent.
    • The accent material can be located on the ledges, the wall near the bath, inside the shower stall, in the wash area.
    • You should not skimp on finishing by choosing expensive furniture and plumbing. Expensive interior elements don't look harmonious with cheap wall backgrounds.

    When choosing a facing material, you need to take into account the resources of a particular interior style. For example, brick and concrete textures are appropriate in a loft. Plastic panels will give them better than others. The color of the brick can be either white or standard and even gray. However, there should not be a lot of brick decoration in the interior: for expressiveness, an accent in one wall is enough.

    Modern strives for simplicity and sophistication. In this case, it is worth taking a closer look at plastic siding or large tiles. The texture of the facing material can be monochromatic, with stains, made to look like marble or plaster. Colors should be light, soft and muted. Stylistics strives for space and light.

    If you need to decorate a bath in the best traditions of retro styles, painting the walls is relevant. They need to be decorated preferably in color, creating a basis for further arrangement. Here you can also choose the adaptation of the style to the design of the painted board, using plastic panels with a matte type of texture. You need to make the walls light, choosing shades from a palette of pastel and bleached tones.

    In a log house, when finishing a bathroom, you can use light finishing materials. The wood deforms, making tiles undesirable. An excellent solution can be a self-adhesive film - it has a minimum weight, is elastic and can be replaced with a new one if desired. Dismantling it is not particularly difficult.

    Despite the fact that there are a lot of finishing options in the assortment of stores, not everyone understands how to choose it correctly. Returning to the basis - style, it is worth remembering: not every cladding with a pattern is appropriate in a particular case. For example, if an ethnic interior, for example, Indian, is chosen as the basis for the design, a panel in the form of a statuette or a Buddha figure will look much better here than large and variegated flowers.

    Some modern styles don't even need a patterned finish. For example, for modern, hi-tech, art deco and brutalism, the originality of the texture is preferable. Moreover, for greater expressiveness, it will have to be diluted. Basically, you will need to buy two different materials, using a solid color to soften the textured one.

    The presence of large prints on the walls where it is not needed leaves no room for accentuating the space. The abundance of variegation brings boredom and breaks the style of the interior. The same huge dolphins against the backdrop of the seabed or funny cartoon fish immerse you in a strange atmosphere. Any interior therefore looks spectacular and expressive because the background design is unloaded in it, so that plumbing fixtures, furniture, and accessories are visible against its background.

    Wall design options

    Modern bathroom decoration ideas can be very diverse. Examples of a small photo gallery prove that decorating bathroom walls can be elegant and original.

    • Expressive interior in neutral tones with bath and shower.
    • An original bathroom project using contrasting finishes as an element of the bathroom zoning.
    • Bathroom design option with decorative stone wall decoration, creating a special atmosphere.
    • Interior project of a combined bathroom with painted walls and white fixtures.
    • An example of the contrast between wood and ceramic textures, furnishing a bathroom in a country house.
    • Decoration of the bathroom walls with self-adhesive film with a discreet pattern in light colors.
    • Interior with plastic panels in a shade similar to the selected furniture.
    • The stone finish of the washing area looks impressive due to the laconic type tiles used.
    • Design project with accentuation of the partition, next to which there is a laconic bath.
    • Decorated with marble panels, elegant interior in light colors.

    For information on how to decorate the walls in the bathroom with your own hands, see the next video.

    no comments

    Fashion

    the beauty

    House