Blouse with ruffles on the shoulders: pattern and tailoring

A blouse with a flounce on the shoulders is back in fashion. Lush decor will be that highlight in the image of girls, which will attract the attention of everyone around. Designers model the blouse as they please. It can be a blouse with a flounce, which is sewn in the center of the shelf.

A blouse with a flounce on the shoulders looks very sexy and seductive. A belt can be sewn to the product. In this case of cutting, a combination of details from 2 fabrics is permissible: belt and shuttlecock - contrasting fabric, shelf, back and sleeve - main fabric.

In the store you can buy a piece of silk, chiffon, satin, cotton, linen. Each fabric is amazing in its properties and appearance.

Atlas will make the model elegant and delightful. It is not hot in summer and warm in cool. Flowing silk and chiffon can be easily draped and will give the future product an equally stunning look.

Silk crumbles quickly: it needs to be processed on an overlock.

Cotton, linen have good hygroscopicity. Cotton is susceptible to shrinkage during washing, so a piece of fabric should be taken with this disadvantage in mind. The fabric is chosen in any color and pattern.

How to sew a beautiful addition to shorts or jeans? To sew a blouse, take a ready-made pattern.

The pattern looks like this. The length of the blouse can be taken at your discretion. As you can see from the pattern drawing, everything is quite simple. The construction of patterns and cutting resembles the lessons of mathematics and labors.

The following stages of product manufacturing:

• Sew the sides of the product, leaving room for the armhole. Finish open side cuts with a zigzag stitch.
• The two armholes must be closed in one of the following ways: this can be a facing, a bias tape or a special processing seam, which is present on a sewing machine.
• Bias binding is cut from the same materialfrom which the product is sewn. Its width is 3 cm, length is the measure of 2 armholes. The inlay should be cut at an angle of 45 degrees. You can still buy it in the store.

Next steps:

• The facing is drawn along the armhole and sewn into the product. The facing width is 3 cm. From the inside of the blouse, the facing can be sewn with blind stitches.
• Next, you need to prepare the shuttlecock. Sew the underside of the decorative element on the machine with a seam in a hem with a closed cut. On the other side, sew two parallel stitches (no bartack) with the widest stitch on the machine. Gather the shuttlecock along the width of the top of the blouse. What is such a finishing preparation for? In the finished form, she will have beautiful curvy assemblies.
• Sweep the shuttlecock to the top edge of the blouse and sew. In this case, the wrong side of the part should lie on the front side of the product.

The final sewing operations will be:

1. Cut out a plank 3-5 cm wide. The width of the strap must be matched to the width of the elastic. The length is equal to the length of the top of the blouse.
2. First of all, on the bar you need make a slot for the elastic. It can be processed with the special buttonhole foot on the sewing machine. Cut the finished slot with nail scissors or a ripper.
3. The plank folds up twice and is swept over the product. Sew the bar on the machine. Insert the elastic into the strip and adjust its length.
4. Hem the bottom products.

The flounce on the blouse is beautiful because it can be used to decorate the blouse as you like. For example, sew a shuttlecock along an oblique line along the entire length of the shirt. The decorative element captures two parts of the shelf. In the photo you can see that it will be a classic office shirt with a turndown collar, sleeveless.

On the pattern of the finished shirt, you need to make some changes:

1. Need to deepen the armhole.
2. On the lateral sides of the back and shelf from the bottom edge downward, retreat 1.5-2 cm and draw a new armhole. Open the shirts to change a little. The shelf must be cut out without a cut along the fastener line.
3. The button closure should be sewn on the placket.

Let's start building a shuttlecock. The decor has beautiful folds. It needs to be cut out in a spiral. The part can have different widths. It all depends on the desire of the mistress of the blouse. Here it is recommended to first cut it out on paper, cut it out and attach it to a future product.

Based on the pattern of a blouse without a collar, you can sew a blouse with a flounce on the shoulder.

The pattern changes will be as follows:

• Divide the length of the shoulder into two equal segments.
• Along the line that passes through the lower edge of the armhole, lay off the following segments - 15 cm, 11 cm.
• Connect the obtained points with a line.
• Cut the shelf along the resulting line.

Another design idea. The basis of the pattern is a short-sleeved blouse without a collar. Draw a horizontal line approximately in the middle of the armhole to the middle of the shelf. The finished flounce will pass at the level of the chest and the middle of the sleeve length.

This is a continuation of the previously proposed blouse.

There are several ways to model the above blouse.

For the pattern of a blouse with a flounce without sleeves, you can build a drawing of a sleeve (the pattern is taken from the above blouse).

The drawing will require 2 measurements:

• The length of the sleeve. First put the measuring tape on the shoulder, then the tape is lowered to the level of the hand.
• Armhole length. The measure must be removed from the shelf drawing.
• Sleeve bottom length. It is equal to the half-girth of the hand. But! It is also necessary to add to this length the length for the free entry of the hand. All these measurements can be taken at your discretion, taking into account the insertion of an elastic band along the edge of the sleeve.

The drawing should look like this (see photo below). In appearance, the sleeve pattern resembles a half of a trapezoid. The sleeves are cut in the middle of the selected material.

The style of a blouse with a flounce is an interesting idea for girls with a slender waist. If the girls follow our instructions exactly, then by the summer you can surprise all your girlfriends with a chic new thing. A blouse with sleeves is an option for cool weather.

In the piggy bank of needlewomen there is another master class on sewing a blouse with a flounce on the shoulders.